By Chelsea Rignall on July 15 2018 09:02:46
Above-ground fire pits can be constructed from a variety of materials. The most popular options are brick, natural stone and concrete blocks, such as Belgard retaining wall products. Although design options are endless, most fire pits are either round or square. One reason has to do with the shape of standard fire pit liners.
Although fire pits are a common appearance in more traditionally influenced landscapes, with the right detailing they can fit perfectly in modern-leaning yards. That’s why the choice of material is particularly important if you’re adding a fire pit after the backyard gathering area has already been assembled. Here, an atypical fire pit design -- a sloped-in base -- as well as the neutral color and wide top shelf help give this portable fire pit a clean-line aesthetic.
All permanent fire pits have some sort of fireproof material as a surround; it acts as a barrier to prevent people from getting too close and as a buffer to any loose, hot materials that may escape the structure. If you have the space, a wider than normal decking can be easily integrated into the fire pit’s permanent seating, for a setup that mimics this space. Here, a slightly raised surround elevates the narrow ring of the fire pit and offers casual seating for larger gatherings.
Pre-made fire pits are the most common form of fire pits and can be purchased from a store. These are commonly made of pre cast concrete or metal and/or a combination of metal table and stone. They are usually natural gas, propane ( LP ) or bio ethanol. Wood burning fire pits made of metal are also quite common but under increasing scrutiny due to fire bans and air particulate emissions. Natural gas and propane burners in these sort of pre fabricated vessels are certified under ANSI ( American ),CSA ( Canadian ) and CE ( European ) standards. Unregulated and uncertified fire pit burners are increasingly being scrutinized by regulatory authorities and being denied permits. Fire pits have recommended clearance to combustibles and require at least 5 feet above the flame and 16" circumference from the exterior perimeter of the vessel.