By Amelia Mellor on June 05 2018 13:11:49
Essentially, to make a fire pit only a hole is required in order to safely contain a fire. This can be as simple as digging a hole in the ground, or as complex as hollowing out a brick or rock pillar. A wood burning fire pit should be located at least ten feet (three metres) away from structures for safety. Use of a fire pit in adverse conditions should be avoided, and basic fire safety precautions apply.
For very narrow landscape spaces, a full circle may not be feasible for a fire pit. That’s OK: Like so much else in our homes, fire pits very much adapt to our personalized style as well as our space restrictions. This half-circle fits neatly into a sloping space that’s not deep enough to accommodate any wider diameter.
Pre-made fire pits are the most common form of fire pits and can be purchased from a store. These are commonly made of pre cast concrete or metal and/or a combination of metal table and stone. They are usually natural gas, propane ( LP ) or bio ethanol. Wood burning fire pits made of metal are also quite common but under increasing scrutiny due to fire bans and air particulate emissions. Natural gas and propane burners in these sort of pre fabricated vessels are certified under ANSI ( American ),CSA ( Canadian ) and CE ( European ) standards. Unregulated and uncertified fire pit burners are increasingly being scrutinized by regulatory authorities and being denied permits. Fire pits have recommended clearance to combustibles and require at least 5 feet above the flame and 16" circumference from the exterior perimeter of the vessel.
Built-in seating is currently one of the top trends in outdoor living and makes an excellent addition to a fire pit design. Some people like to place seat walls four feet away from the fire pit, which allows for walking room. Others prefer a three-foot distance, which can allow you to prop your feet on the ledge of the pit. If using seat walls, consider leaving one or two sides open. This will allow for the option of furniture placement, which softens the look and adds interest to the design. To add comfort and color to seat walls, use a variety of throws and outdoor pillows.