By Ruby Cookson on June 13 2018 19:21:57Read Also:
Essentially, to make a fire pit only a hole is required in order to safely contain a fire. This can be as simple as digging a hole in the ground, or as complex as hollowing out a brick or rock pillar. A wood burning fire pit should be located at least ten feet (three metres) away from structures for safety. Use of a fire pit in adverse conditions should be avoided, and basic fire safety precautions apply.
There are few things more welcoming in an outdoor space than a fire pit. Fortunately, these amenities come in shapes and sizes to fit nearly every budget and landscape style.
Although fire pits are a common appearance in more traditionally influenced landscapes, with the right detailing they can fit perfectly in modern-leaning yards. That’s why the choice of material is particularly important if you’re adding a fire pit after the backyard gathering area has already been assembled. Here, an atypical fire pit design -- a sloped-in base -- as well as the neutral color and wide top shelf help give this portable fire pit a clean-line aesthetic.
The Dakota fire pit is an efficient, simple fire design that produces little to no smoke. As depicted in the illustration, two small holes are dug in the ground: one for the firewood and the other to provide a draft of air. Small twigs are packed into the fire hole and readily combustible material is set on top and lit. The fire burns from the top downward, drawing a steady, laminar stream of fresh air from the air hole as it burns. Because the air passes freely around the fuel, near complete combustion is achieved, the result being a fire that burns strongly and brightly and with little or no seen smoke. The Dakota fire pit is a tactical fire used by the United States military as the flame produces a low light signature, reduced smoke, and is easier to ignite under strong wind conditions.
build your own fire pit
cheap fire pit ideas
simple backyard fire pit