By Rita Hubbard on July 11 2018 19:08:50
Essentially, to make a fire pit only a hole is required in order to safely contain a fire. This can be as simple as digging a hole in the ground, or as complex as hollowing out a brick or rock pillar. A wood burning fire pit should be located at least ten feet (three metres) away from structures for safety. Use of a fire pit in adverse conditions should be avoided, and basic fire safety precautions apply.
A fire pit or a fire hole can vary from a pit dug in the ground to an elaborate gas burning structure of stone, brick, and metal. The common feature of fire pits is that they are designed to contain fire and prevent it from spreading.
Pre-made fire pits are the most common form of fire pits and can be purchased from a store. These are commonly made of pre cast concrete or metal and/or a combination of metal table and stone. They are usually natural gas, propane ( LP ) or bio ethanol. Wood burning fire pits made of metal are also quite common but under increasing scrutiny due to fire bans and air particulate emissions. Natural gas and propane burners in these sort of pre fabricated vessels are certified under ANSI ( American ),CSA ( Canadian ) and CE ( European ) standards. Unregulated and uncertified fire pit burners are increasingly being scrutinized by regulatory authorities and being denied permits. Fire pits have recommended clearance to combustibles and require at least 5 feet above the flame and 16" circumference from the exterior perimeter of the vessel.
For very narrow landscape spaces, a full circle may not be feasible for a fire pit. That’s OK: Like so much else in our homes, fire pits very much adapt to our personalized style as well as our space restrictions. This half-circle fits neatly into a sloping space that’s not deep enough to accommodate any wider diameter.
backyard fire pit ideas
cheap fire pit ideas
in ground fire pit ideas