By Ruby Cookson on July 12 2018 02:46:47
Essentially, to make a fire pit only a hole is required in order to safely contain a fire. This can be as simple as digging a hole in the ground, or as complex as hollowing out a brick or rock pillar. A wood burning fire pit should be located at least ten feet (three metres) away from structures for safety. Use of a fire pit in adverse conditions should be avoided, and basic fire safety precautions apply.
An in-ground fire pit can be cost-effective, however above-ground pits are more common. One trend is to create a “sunken living room” design for an above-ground fire pit. This offers the added benefit of built-in seating. In addition, the surrounding wall can act either as a wind barrier or a heat reflector, creating a warm and cozy room.
Loose and casual, the distinctive design of this fire pit makes it feel as though it springs naturally from the paved patio area. Although the fire pit is a central part of the secluded backyard, the homeowners tucked it in a seating corner, surrounding it with benches and chairs to better manage the main traffic flow in the landscape.
The Dakota fire pit is an efficient, simple fire design that produces little to no smoke. As depicted in the illustration, two small holes are dug in the ground: one for the firewood and the other to provide a draft of air. Small twigs are packed into the fire hole and readily combustible material is set on top and lit. The fire burns from the top downward, drawing a steady, laminar stream of fresh air from the air hole as it burns. Because the air passes freely around the fuel, near complete combustion is achieved, the result being a fire that burns strongly and brightly and with little or no seen smoke. The Dakota fire pit is a tactical fire used by the United States military as the flame produces a low light signature, reduced smoke, and is easier to ignite under strong wind conditions.
in ground fire pit ideas
awesome fire pit ideas
cozy fire pit designs